Saturday 4 October 2008

Brain dump

I have added a page to the new Reprap Builder's wiki recording all I know about the original MK2 extruder. I make no apologies for including lots of links back to this blog and recycling some photos, but there are also many new ones.

Although the design has moved on, I have stuck with the original and tweaked it to fix the problems I have encountered. I don't think any of the later, more complex designs have better performance, except perhaps the anti-ooze version. That seemed like a nice idea but rapidly got too complex with a double nozzle and two heaters plus some tricky machining. I think instead stringing can be mitigated to a large extent by increasing the speed of moves between extrusions paths. I am hoping to go from 32mm/s on HydraRaptor to 150mm/s on Darwin. Also I think reversing the extruder motor a fixed amount measured by the shaft encoder, plus Enrique's oozebane and comb modules in Skeinforge should help a lot.

4 comments:

  1. "I don't think any of the later, more complex designs have better performance, except perhaps the anti-ooze version. That seemed like a nice idea but rapidly got too complex with a double nozzle and two heaters plus some tricky machining."

    Hear! Hear! I'm glad that I'm not the only one who feels that way.

    ReplyDelete
  2. Interesting site with animations of linkages, and gear designers:
    www.mechanisms101.com

    ReplyDelete
  3. Thank you very much! This will surely be helpful, once i get my own extruder together =)

    ReplyDelete