Showing posts with label ABS. Show all posts
Showing posts with label ABS. Show all posts
Monday, 10 January 2011

ABS on PETG

›
I have been using PET tape on my heated bed for a long time now. It works very well as long as I clean it with acetone about every 100 hour...
4 comments:
Sunday, 12 September 2010

Some corners like it hot

›
Large objects with sharp corners, such as the Mendel z-leadscrew-base, produce enough stress to form a blister in the PET tape on my heated ...
17 comments:
Saturday, 3 July 2010

ABS on PC

›
My last heated bed ran for a long time but it finally went pop on Mendel print number 15. The TO220 resistors developed a short to earth ab...
14 comments:
Monday, 24 May 2010

Black and White

›
I bought some new ABS filament from reprapsource.com as it is a reasonable price, the postage from Germany is not too bad and being in the ...
7 comments:
Sunday, 10 January 2010

Golden wonder

›
My first attempt at extruding ABS onto hot Kapton had " all the stops pulled out " to make it stick, i.e. 120°C bed, nozzle heigh...
38 comments:
Tuesday, 5 January 2010

Hot metal and serendipity

›
I couldn't get to work today because we had seven inches of snow during the night and a couple more today, so I had an extra day of RepR...
29 comments:
Tuesday, 3 November 2009

Hacking with Erik

›
Erik de Bruijn (RepRap evangelist) is in the UK at the moment visiting Salford and Nottingham universities to spread the word. Yesterday he...
24 comments:
Thursday, 20 November 2008

Hot Stuff

›
When I was making the chuck grip I noticed that the raft changed colour part way across the top layer of the raft. The heater seemed to be o...
2 comments: